Comments on: Globe Broadband: Setting up PROLiNK Hurricane 5200 with Linksys WRT54G2

By: Jan Guldvog

Jan Guldvog — Fri, 10 Feb 2012 06:48:51 +0000

Password doesn’t work!

By: seo-proxies

seo-proxies — Thu, 09 Feb 2012 04:49:27 +0000

An interesting discussion is worth comment. I feel which you really should write a lot more on this topic, it might not be a taboo topic but frequently people are not adequate to speak on such topics. To the next. Cheers

By: pvtinternet.dyndns.org

pvtinternet.dyndns.org — Tue, 07 Feb 2012 12:35:55 +0000

And if you just share your internet in the room there is no need to set Linksys as PPPoe unless kung may balak ka gumawa ng Wifi Hotspots na binabayaran. Just set it to Automatic configuration – DHCP

By: pvtinternet.dyndns.org

pvtinternet.dyndns.org — Tue, 07 Feb 2012 12:30:29 +0000

Here is an example.
Prolink Hurricane 5200 default IP is 192.168.1.1
for wireles 192.168.254.254

Linksys WRT54G2 default IP is 192.168.1.1

As you can see naman si Prolink at Linksys ay magkapareha ang IP except sa wireless.
So kung hahayaan mo lang ang IP ni linksys mag ka conflict yan so walang internet lalabas sa pc mo.

How to configure:
1. Hayaan mo nalang ang IP ni prolink at wag muna ikabit si prolink kay linksys.
2. Pasukin mo si Linksys sa 192.168.1.1.
3. Goto Lan setup and find the LAN IP ni linksys. Pag may makita ka dun na 192.168.1.1 yan na palitan mo like 192.168.2.1.
4. Hayaan mo ang subnet mask.
5. Hanapin mo si default gateway mostly auto detect yan. Pero mas maganda e manual mo e type mo si Prolink IP 192.168.1.1
6. Save and reboot. (Kusang mag reboot si linksys)

So ang IP ni linksys ngayun ay 192.168.2.1 while the rest of the computer susunod sa subnet ni linksys like 192.168.2.2 etc. So there is no need to restart PC only the browser.

BTW sa mga prolink na wireless na ang IP 192.168.254.254 hindi na dapat palitan ang IP ni Linksys kasi makikita mo naman di sila pareho so there is no conflict between them.

Thank you..

By: pvtinternet.dyndns.org

pvtinternet.dyndns.org — Tue, 07 Feb 2012 12:17:11 +0000

[quote]
1. First pag pa andar ng Modem, it will “contact” Globelines server and ask permission to connect. Tapos bibigyan sya ng IP address na magagamit.[/quote]
Ammm.. Pag andar ni modem it will try to connect sa globe using PPPoe protocol with authentication. Kaya nga may account input sa index page ni prolink username:password. And modem ay kusang susunod sa subnet ng server hindi po si globe ang magbigay ng address sa modem. Prolink ay may default IP na po. Madalas 192.168.1.1 and 192.168.254.254 for wireless..
[quote]
2. When we turn on the router, it will “contact” the modem and the modem will give it an IP address. Note na modem ang bibigay ng IP Address sa router, at hindi na Globe kasi sa loob na ng bahay at tawag na natin dito ay “home network”.[/quote]
As I said ang router ay my default IP na po hindi si modem ang magbigay ng IP sa router. Si modem ay gagamitin lang sa router as internet gateway and DNS para mag ka internet.

3. Syempre, ang computer hihingi din ng permission to connect and IP address, pero ang router naman bibigay ng IP address sa computer.
Ang computer ay susunod lang sa subnet ng router hindi ang router ang mag bibigay ng IP sa computer. Gagamitin lang sa computer si router as internet gateway and DNS.
[quote]
4. Pag sablay ang order, minsan gagana rin lang naman. Pero malaki ang chansa na hindi sya gagana. Wala rin mawawala kung mag powercycle sa tamang order. [/quote]
Awtz! Pag sablay di talaga gagana walang minsan yan.

BTW Prolink Hurricane is not just a modem, it is a modem router.

By: Dogbert

Dogbert — Thu, 02 Feb 2012 13:38:49 +0000

plug ka directly sa modem bypass mo router

By: Dogbert

Dogbert — Thu, 02 Feb 2012 13:36:42 +0000

Hello Sir/Ma’m

Im bored and nothing to do so here goes.

Ang tawag po diyan is “powercycling”.

Here’s an explaination as easy as i can put it.

Para gumana ng husto ang home network kelangan patayin ang mga equipment at least 20 seconds PERO kelangan mag perform ng tinatawag na “sequenced powercycle” when turning the devices on, one at a time.

in correct order:

1. Turn on Modem, wait 30 seconds
2. Turn on Router, wait 30 seconds
3. Turn on Computer.
4. Bigyan mo ng mga two minutes, tapos check mo kung gumagana na ang internet

——
Question: “Bakit kelangan pa patayin?”
Answer: Lumang settings pa minsan ginagamit ng modem/router/computer mo. Para ma release yan, papatayin ang equipment para walang kuryente na dadaloy sa loob at ma refresh ang system nya.

Question: Bakit kelangan in order?
Answer: Ganito yan sa mga internet provider in a very basic explaination.

1. First pag pa andar ng Modem, it will “contact” Globelines server and ask permission to connect. Tapos bibigyan sya ng IP address na magagamit.

2. When we turn on the router, it will “contact” the modem and the modem will give it an IP address. Note na modem ang bibigay ng IP Address sa router, at hindi na Globe kasi sa loob na ng bahay at tawag na natin dito ay “home network”.

3. Syempre, ang computer hihingi din ng permission to connect and IP address, pero ang router naman bibigay ng IP address sa computer.

4. Pag sablay ang order, minsan gagana rin lang naman. Pero malaki ang chansa na hindi sya gagana. Wala rin mawawala kung mag powercycle sa tamang order.

Have a nice day

By: josh

josh — Thu, 05 Jan 2012 00:33:35 +0000

i log in to http://192.168.254.254 but i cant go to setup cause i dont know the user and the password pls help T_T

By: Ton

Ton — Fri, 30 Dec 2011 23:23:59 +0000

Question: I login to 192.168.1.1/globe with admin password Why I still get user mode menu. No admin settings like WAN, LAN, DHCP?

By: niel

niel — Wed, 21 Dec 2011 03:20:04 +0000

ask lang po bat po need pa resrt nung pc tska po nag kaka net… pag off ko ung pc tpos on ko wlang net then pag ni resrt ko nag kakaron na cya…